Environmentally friendly printing crosslinker FK-100
[Feature]Exterior: colorless or slightly yellowish transparent liquid
Solid content (%) : > 97
PH value (25℃) : 8 ~ 10.5
Water resistance (25℃%) : > 100
Viscosity (25℃) mPas: 100 ~ 400
Product specification: 5KG, 30Kg
Storage (-15℃ -25 ℃) : 24 months
[Instructions]This product belongs to the additive type, so it can only be added during use.
The PH value of the adhesive should not be lower than 7, otherwise, too fast cross-linking will affect the film-forming effect.
Add amount (according to binder solid content 1 ~ 3% adjustment).
With the rapid development of environment-friendly printing technology, higher requirements have been put forward for water resistance, cohesive strength and dry and wet resistance of high-grade environment-friendly printing.
Environmental printing crosslinking agent can fk1 - FK - 100 and printing adhesive [carboxyl butyl benzene latex, styrene acrylic emulsion, water-based acrylic emulsion and waterborne polyurethane dispersion 】 in the hydrophilic group of crosslinking reaction, the adhesive is formed through crosslinking modification of linear structure of the original mesh three-dimensional structure, raise the water resistance of printing coating, bond strength and wet strength, resistant to chemicals and so on, reduce the deformation of printing coating, significantly improve the printing coating performance.
Environmentally friendly printing crosslinker FK-100 is miscible with water and many organic solvents and can react in dry conditions.The amount of green printing crosslinker FK-100 is usually 1%-3% of the solid content of printing binder. It can be cured at room temperature or by heating and baking.The cross-linked coating can significantly improve the water resistance, chemical resistance, dry and wet friction resistance, surface viscosity, and improve the adhesion on special fabrics, etc.
Environment-friendly printing crosslinker FK-100 features
Environmentally friendly printing crosslinking agent FK-100 can react with the carboxyl group of printing adhesive, making the hydrophilic group in the adhesive change from hydrophilic to hydrophobic through cross-linking, and forming a stable cross-linking at low temperature, thus improving the drying rate.
Environmentally friendly printing cross-linking agent FK-100, as a printing adhesive, washable cross-linking agent has the characteristics of fast curing cross-linking, formaldehyde free, low consumption, good adaptability, etc. Its clothing products meet ROHS and REACH standards, and can be exported to the European Union and Japan.
Environment-friendly printing cross-linking agent FK-100 is used in the paint of printing adhesives. The cross-linking solidifies quickly, and the finished products have good water-resistant performance without long storage time or multi-stage drying, which can make the printed garments have excellent comprehensive performance in the aspects of wet-resistance, dry-wear resistance and water-resistant.In large-scale industrial production, this product has the following characteristics:
1: Improve the speed, increase production capacity: improve the drying speed of adhesive, that is, improve the speed, greatly increase the production capacity per unit
2. Reduce comprehensive energy consumption: Reduce drying temperature, that is, reduce energy consumption and improve economic benefits
3: Improve the quality of the garment: it can react with the adhesive, provide high strength water resistance effect, can react quickly with carboxyl groups, can be quickly finished after getting off the machine, can greatly improve the wet friction and dry friction of the finished product, and water resistance.
4: Higher environmental requirements: no free formaldehyde, belongs to environmental protection products.
WRITE A MESSAGE TO US