Hangzhou Palm Land Technology Development Co., Ltd.

With the rapid development of environment-friendly printing technology, higher requirements have been put forward for water resistance, cohesive strength and dry and wet resistance of high-grade environment-friendly printing.

Environmental protection printing crosslinking agent can PM  - FK - 400 with printing adhesive [carboxyl butyl benzene latex, styrene acrylic emulsion, water-based acrylic emulsion and waterborne polyurethane dispersion 】 in the hydrophilic group of crosslinking reaction, the adhesive formed through crosslinking modification of linear structure of the original mesh three-dimensional structure, raise the water resistance of printing coating, bond strength and wet strength, resistant to chemicals and so on, reduce the deformation of printing coating, significantly improve the printing coating performance. 

The environmentally friendly printing cross-linking agent PM-FK-400 is miscible with water and many organic solvents and can react in dry conditions.The dosage of pM-FK-400, an environment-friendly printing cross-linking agent, is usually 3%-5% of the solid content of the printing binder. It can be cured at room temperature or by heating and baking.The cross-linked coating can significantly improve the water resistance, chemical resistance, dry and wet friction resistance, surface viscosity, and improve the adhesion on special fabrics, etc.

PM-FK-400 environment-friendly printing crosslinking agent

PM-FK-400, an environment-friendly printing crosslinking agent, can react with the carboxyl group of printing adhesive, making the hydrophilic group in the adhesive change from hydrophilic to hydrophobic through cross-linking, and forming a stable cross-linking at low temperature, thus improving the drying rate.

PM-FK-400, an environment-friendly printing cross-linking agent, is a water-resistant cross-linking agent with advantages of fast curing cross-linking, formaldehyde free, low consumption and good adaptability. Its garment products meet ROHS and REACH standards and can be exported to THE European Union and Japan.

PM-FK-400, an environment-friendly printing cross-linking agent, is used in the paint of printing adhesive. The cross-linking can cure quickly, and the finished product has good water-resistant performance without long storage time or multi-stage drying, which can make the printed garment obtain excellent comprehensive performance in the aspects of wet-friction resistance, dry grinding resistance and water-resistant.In large-scale industrial production, this product has the following characteristics:

1: Improve the speed, increase production capacity: improve the drying speed of adhesive, that is, improve the speed, greatly increase the production capacity per unit

2. Reduce comprehensive energy consumption: Reduce drying temperature, that is, reduce energy consumption and improve economic benefits

3: Improve the quality of the garment: it can react with the adhesive, provide high strength water resistance effect, can react quickly with carboxyl groups, can be quickly finished after getting off the machine, can greatly improve the wet friction and dry friction of the finished product, and water resistance.

4: Higher environmental requirements: no free formaldehyde, belongs to environmental protection products.

5: and paste has a better shelf life, more suitable for large quantities of machine printing, especially in summer high temperature, can ensure the paste stable liquidity.

6: The printing of cotton fabric can improve the color fastness to about level 1.