PM-FP300 cross-linking agent for waterborne coatings and waterproofing coatings
[Feature]External view: light yellow to yellow transparent viscous liquid
Active ingredient: Mixture
Active ingredient (%) : > 98
PH value (25℃) : > 9-11
Viscosity (25℃) mPas: 400 ~ 2000
Product specification: 5Kg,30Kg
Storage (-15℃ -25 ℃) : 12 months
[Instructions]This product belongs to the additive type, so it can only be added during use.
The PH value of waterproof coating should not be lower than 7, otherwise, too fast crosslinking will affect the film-forming effect.
The amount added (adjusted according to 3 ~ 5% of waterborne waterproof coating).
With the national increasingly limited waterproofing coating, the development trend of waterproofing coating is getting faster and faster, and higher requirements have been put forward for the water-resistance, anti-adhesion and resistance to dry and wet wear and chemical resistance of high-grade environmental waterproofing coating.
PM-FP300 is a water-based crosslinking agent specially designed for water-based waterproofing coatings with special properties. Compared with ordinary cross-linking agent, it has the following advantages
1. Excellent product performance stability, 12 months storage stability at room temperature.
2. Excellent dispersibility of water and solvent, colorless and transparent when dissolved at room temperature.
3. Under the conventional construction technology, the waterproof coating film can be provided with excellent transparent and clear luster.
4. Breaking the temperature limit, the PM-FP300 and waterproof coating mixture can ensure good water resistance even when used at low temperatures.
Environmental protection is waterproof coating crosslinking agent can PM - FP300 waterborne waterproof paint coating and the carboxyl butyl benzene latex, styrene acrylic emulsion and pure acrylic emulsion, waterborne polyurethane dispersion, etc.) in the hydrophilic group of crosslinking reaction of the resin, the resin coating linear structure by crosslinking modification of the original form a mesh three-dimensional structure, increase the water resistance and chemical resistance of the waterproof coating paint.
PM-FP300, a cross-linking agent for environmentally friendly waterproof coatings, is miscible with water and many organic solvents to obtain a clear and transparent solution.The dosage of PM-FP300, a cross-linking agent for environment-friendly waterproof coating, is usually 3% of the waterproof coating, and 5% can be used for higher waterproof requirements.It can be cured at room temperature or by heating and baking.The cross-linked waterproof coating can be significantly improved.
PM-FP300 cross-linking agent for environmentally friendly waterproof coatings
PM-FP300, a cross-linking agent for environment-friendly waterproofing coating, can react with carboxyl, hydroxyl and amino groups in waterproofing coating, making the hydrophilic groups in waterproofing resin change from hydrophilic to hydrophobic through cross-linking.
PM-FP300 is a high-performance cross-linking agent for environment-friendly waterproof coatings. It is used in waterproof coatings for rapid cross-linking curing.
In large-scale industrial production, this product has the following characteristics:
1: Improve the construction speed, increase production capacity: improve the drying speed of waterborne waterproof coating, that is, improve the construction speed, the unit production capacity greatly increased.
2: Reduce the comprehensive energy consumption: reduce the drying temperature, even in winter construction, can also achieve good water resistance.That is to reduce energy consumption and improve economic benefits.
4: Higher environmental requirements: no free formaldehyde, belongs to environmental protection products.
WRITE A MESSAGE TO US